Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Mercedes GLK 350

Model: Mercedes Glk MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

Video tutorial

In this guide, you will learn how to reset the engine oil light on the Mercedes GLK. This is a routine operation performed whenever you change the oil and the corresponding filter to permanently eliminate the warning light from the dashboard display.

First, insert the key and turn it to position one. Use the button with the left arrow (located on the left side of the steering wheel) to navigate the menu and find the option for the total mileage of the car. Press the call button and then the "OK" button.

At this point, select "Assyst Plus" and "Full Service". Finally, select the correct oil grade used through the "Conf Full Service" option and confirm the reset when prompted.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to reset the service light of the 2011 Mercedes GLK 350
How to reset the service light of the 2011 Mercedes GLK 350
Mercedes Glk (2008-2015 / MK 1) Resetting the service light of the 2011 Mercedes GLK 350 is a very simple operation to perform as you just need to use the vehicle's onboard menu. Fi…
How to reset the service light on the Mercedes GLK
How to reset the service light on the Mercedes GLK
Mercedes Glk (2008-2015 / MK 1) In this guide we will see the instructions necessary to reset the service maintenance light of the engine oil change on the Mercedes GLK. First, get …
How to Change Oil on a Mercedes Glk
How to Change Oil on a Mercedes Glk
Mercedes Glk (2008-2015 / MK 1) How to change the engine oil on a Mercedes Glk? Let's look at the oil and filter change. Open the car door and pull up the engine compartment release…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos