Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to replace the cabin air filter on Mercedes C-Class W204

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Cabin air filter
Operation: How to replace the cabin air filter on Mercedes C-Class W204

If when you turn on the air conditioning of your Mercedes C-Class W204 (year 2007-2013) you smell bad or perceive a marked deterioration in the quality of the air you breathe, it means that it is time to replace the filter. passenger compartment air. Let's find out how. First, go inside the car and make sure it is turned off. At this point, reach the passenger side and with the help of a special wrench, unscrew all the various screws on the underside of the glove compartment. Immediately after, remove the plastic panel and locate the filter box. Finally, remove the cover of the latter and proceed with the replacement of the filter.


Posted on 2 October 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2007-2013 - Where is the cabin air filter of the 2013 Mercedes C220 CDI coupe located? Read Answer
    • Classe C 2007-2013 - How much does the Mercedes C-Class 220 cabin air filter cost? Read Answer
    • Classe C 2007-2013 - Where is the air conditioning filter of the Mercedes CW 204 class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos