Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Glass on a Mercedes CLK W209

Model: Mercedes Clk A209, C209, W209 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Side window

See other generations:
Video tutorial

Let's see how to change the side glass on a Mercedes CLK. First, open the front door, and remove the external chrome seal, using a plastic spatula to avoid damaging the bodywork. Now remove the metal plate that holds the glass seals in place.

Next, you need to remove the inner panel, starting from the plastic cover that hides the screw holding the panel. Remove the rubber seal on the outer part of the door; this will give you access to the pressure plastics, which you can push outwards to open.

Remove the rear seatbelt mechanism from its housing. At this point, the panel will come off. Lower the glass, remove the side glass seal, and then the one surrounding it from the inside and outside.

Raise the glass and take it out.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to Remove the External Mirror Glass on a Mercedes CLK
How to Remove the External Mirror Glass on a Mercedes CLK
Mercedes Clk (2002-2010 / A209, C209, W209) Let’s see how to remove the external mirror glass on a Mercedes CLK. Using a lever (with a plastic or rubber cover), pry between the perimeter of the…
How to Lower the Rear Headrests on a Mercedes CLK W209
How to Lower the Rear Headrests on a Mercedes CLK W209
Mercedes Clk (2002-2010 / A209, C209, W209) In this short video, you will see the instructions to lower the rear headrests on the Mercedes Benz CLK first and second series (both W208 and W209).…
How to Replace the Battery on a Mercedes CLK W209
How to Replace the Battery on a Mercedes CLK W209
Mercedes Clk (2002-2010 / A209, C209, W209) This useful video tutorial shows all the necessary steps to replace the battery on your Mercedes CLK W209, produced from 2002 to 2010. First, open th…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos