Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Glc
    4. : How to replace the front door panel in the Mercedes GLC?

Mercedes Glc - Video tutorial

Model: Mercedes Glc C253, MK 1, X253 - Years 2015-2022
Part: Door panel
Operation: How to replace the front door panel in the Mercedes GLC?

Replacing the front door panel in the Mercedes GLC is a very simple and fast operation, let's see how to proceed in this tutorial. We start by going inside the passenger compartment, after which we open the window completely and disengage the cover of the handle with the help of a plastic spatula. Then unscrew the two screws just released, grab the panel from the lower outer edge and separate it from the door, helping us again with the spatula if necessary. Once completely removed, we can disconnect the connectors of both the window control console and the lock and proceed with the assembly of the spare part.


Posted on 18 October 2022 by ScegliAuto



How to unlock the locked fuel tank door in the Mercedes GLC?
Mercedes Glc (2022-2024 / MK 2, X254, C254) In the Mercedes GLC, it can happen that the fuel door gets stuck, for example due to a malfunction of the control button or the lock actuator. In thi
How do I remove the door panel of the Mercedes GLC?
Mercedes Glc (2015-2022 / C253, MK 1, X253) To be able to remove the door panel of the Mercedes GLC, you must first unhook the case which is located in correspondence with the exterior rear-vie
How to mount the side step on a Mercedes GLC
Mercedes Glc (2015-2022 / C253, MK 1, X253) Let's start by removing the hooks that secure the plastic under-doors of our Mercedes GLC, and then we will have to remove the relative lower bolts.

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos