Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe S
    4. : How to replace the window console in the Mercedes S-Class?

Mercedes Classe S - Video tutorial

Model: Mercedes Classe S W222, MK 6 - Years 2013-2020
Part: Window lift switch
Operation: How to replace the window console in the Mercedes S-Class?

In this tutorial we can see how to replace the main window console in the Mercedes S-Class, an extremely simple and fast operation. To do this, it is recommended to use a plastic spatula so as not to leave any marks on the various elements. First of all, let's go inside the passenger compartment, then place the spatula under the console on the lower side, push upwards and disengage it from the door panel. Then disconnect the connector, separate the console from the frame and mount the replacement following the reverse procedure.


Posted on 18 October 2022 by ScegliAuto



How do you set the clock on the Mercedes S-Class?
Mercedes Classe S (2005-2013 / MK 5, W221) .. In order to adjust the clock of the Mercedes S-Class, you need to turn on the instrument panel so that you can navigate within the menu that will appear..
How do you set the clock on the Mercedes S-Class?
Mercedes Classe S (2005-2013 / MK 5, W221) .. The clock adjustment procedure on the Mercedes S-Class is done by turning on the instrument cluster, so that it is possible to navigate within the menu..
How to remove the window control panel of a Mercedes S-Class
Mercedes Classe S (1999-2005 / MK 4, W220) .. control panel of the door panel of a Mercedes S-Class? This video explains how to proceed. Before starting the disassembly work, let's disconnect the..

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos