Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Clk
    4. : Disassembly of the glove box

Mercedes Clk - Video tutorial

Model: Mercedes Clk W208 - Years 1997-2003
Part: Glove box
Operation: Disassembly of the glove box

To be able to disassemble the glovebox, open the door and proceed with the disassembly of the interior lighting fixture, disconnecting the relative power socket. Then intercept the fixing screws of the glovebox: two are located in the lower part, under two caps, and two in the upper part; then unscrew the fixing screws using a small screwdriver (the so-called dwarf) and extract the drawer from its seat by pulling it forward. Once the glovebox has been disassembled, it is also possible to carry out any repairs to the device.


Posted on 14 August 2023 by ScegliAuto



Disassembly of the glovebox on a Mercedes Clk
Mercedes Clk (1997-2003 / W208) We see the disassembly of the glovebox located in the cockpit dashboard on a Mercedes Clk. Open the glove compartment and remove the screw covers of
How to remove the glove box of a Mercedes C-Class CLK A209
Mercedes Clk (2002-2010 / W209) Before we can start, we will have to go to open the front passenger door of our Mercedes C-Class CLK A209. So let's start by opening the glove compar
Inspection of the glove box shock absorber
Mercedes Clk (1997-2003 / W208) The support shock absorber of the glovebox door is actually a gas spring: it is in fact composed of a piston with a rubber at the end that acts as a

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos