Do it yourself
Frequently asked questions about cars and motorcycles

What is the fuse diagram for the Mercedes C-Class?

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Fuse box

See other generations:
Video tutorial

In this video, you can see the location of the fuse boxes and their diagrams for the Mercedes C-Class W203, to consult if you need to check the fuse for a malfunctioning device. As shown, the first box is located inside the cabin, behind the left side of the dashboard.

The second box can be found in the engine compartment, under the plastic cover on the driver's side. The third and final box is located on the left wall of the trunk.

Finally, there are additional fuses at the positive terminal of the battery.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2021-2026 / W206) .. you can see the fuse diagram for the Mercedes C-Class and the location of the corresponding fuse boxes, useful if you need to check the fuse for a malfunctioning.. …
Mercedes Classe C (2007-2013 / W204) .. of the respective boxes in the Mercedes-Benz C-Class, to consult in case you need to check the fuse for a malfunctioning device. The first box is located.. …
Mercedes Classe C (2000-2007 / W203) .. of the external fuse box for the Mercedes-Benz C-Class, following the instructions below. First, open the hood of your car and locate the fuse box, which.. …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos