Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe A
    4. : How to disassemble the front bumper in the Mercedes A-Class?

Mercedes Classe A - Video tutorial

Model: Mercedes Classe A W177 - Years 2018-2024
Part: Front bumper
Operation: How to disassemble the front bumper in the Mercedes A-Class?

Removing the front bumper on a Mercedes A-Class is a very simple and fast operation, let's see how to proceed in this tutorial. First of all, open the bonnet, then unscrew all the screws located on the upper side of the grille. We continue by unscrewing the bolts located above the headlights, remove the wheel arch fixing clips and unscrew the additional bolts located inside them. At this point, all that remains is to remove the last lower screws, disconnect the fog lamp connectors and unhook the bumper from the frame. To fit the spare part, simply follow the reverse procedure.


Posted on 23 November 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe A 2004-2012 - How much does it cost to repaint the front bumper of the Mercedes A-Class? Read Answer

How to open the Piaggio Beverly saddle with a flat battery

In today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run.

Watch the video!


by ScegliAuto

More videos