Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter in a Mercedes A-Class?

Model: Mercedes Classe A W168 - Years: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Cabin air filter

See other generations:
Video tutorial

Replacing the cabin filter in a Mercedes A-Class is an extremely simple and quick operation. Let's see how to proceed in this tutorial.

Before starting, wait for the engine to cool completely, as the filter is located right behind it. Begin by opening the hood, then locate the long plastic cover in the center of the rear cover, just in front of the windshield. Next, unlock the two retaining clips, remove it, and open the secondary cover.

At this point, you can extract the old filter, insert the new one, and reassemble everything.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Mercedes A-Class
How to Replace the Cabin Filter on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. do you replace the cabin filter on a Mercedes A-Class? Let's see how to disassemble and replace the parts: Remove the screws securing the plastic under.. …
Replace the Cabin Air Filter on a Mercedes A-Class.
Replace the Cabin Air Filter on a Mercedes A-Class.
Mercedes Classe A (1997-2004 / W168) .. To replace the cabin air filter on a Mercedes A-Class, the first step is to purchase a new pollen filter. Next, get inside the vehicle, turn off the.. …
Replace Cabin Air Filter on Mercedes A-Class
Replace Cabin Air Filter on Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. to remove the cabin air filter from a Mercedes A-Class. Lift the hood, disconnect the cover located at the top of the compartment (under the windshield)... …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos