Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe M
  6. : Removing the seat belt

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W163 - Years 1997-2005
Part: Checks and maintenance
Operation: Removing the seat belt

In order to remove the driver's seat belt, a whole series of plastic coverings must be removed, many of which are press-fitted: it is important to handle these elements with care in order not to damage them; start by removing the side trim of the seat, unclip the chrome moldings on the rear and front door sills to access the fixing screws of the plastic cover; remove the protective caps from the fixing screws of the lower door pillar trim and remove it and then repeat the operation with the upper trim; at this point, unscrew the safety belt fixing pins and disconnect the pretensioner socket to complete the disassembly.


Posted on 17 August 2023 by ScegliAuto



How to replace the timing belt on a Mercedes ML
Mercedes Classe M (2005-2011 / W164) Let's see how to replace the timing belt on a Mercedes ML. Let's open the bonnet and lift it, let's secure it with the dipstick. We disassemble the f
Auxiliary belt replacement
Mercedes Classe M (1997-2005 / W163) The auxiliary (or services) belt is driven by the crankshaft pulley and drives the alternator, air conditioning compressor, power steering pump, wate
Positioning the belt tensioning pulley
Mercedes Classe M (1997-2005 / W163) If, with the engine running, you hear a squeak coming from the front part of the engine, it could be caused by some pulley dragged by the auxiliary b

    Frequently Asked Questions

    • Classe M 2005-2011 - What problems does the Mercedes 320 CDI have? Read Answer
    • Classe M 1997-2005 - What are the problems of the Mercedes ML320 CDI? Read Answer
    • Classe M 2005-2011 - What problems would have been highlighted, in the past, in the Mercedes ML W164? Read Answer
    • Classe M 2011-2018 - How many liters of diesel can the Mercedes M-Class contain? Read Answer
    • Classe M 2011-2018 - What does the AdBlue warning light on the Mercedes M-Class mean? Read Answer
    • Classe M 2005-2011 - What does A1 maintenance mean on Mercedes Benz? Read Answer
    • Classe M 1997-2005 - Where is the stop switch on the 2004 Mercedes ML? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos