Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to reset the service on the Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: -board computer
Operation: How to reset the service on the Mercedes C-Class

After having replaced the oil and the relative filter on the car, we can proceed to cancel the service indication that is lit on the instrument panel by following the instructions below and also helping us with the images in the video. After we are seated in the driver's seat we must turn on the ignition and the service indication will be present on the central display, locate the menu button located on the left of the steering wheel controls, press the arrow to scroll through the functions within the menu and select Service interval. With the plus and minus controls located on the right side of the steering wheel, scroll the indications until "oil reset confirmation", at this point press and hold the button located on the left side of the instrument panel for at least 3 seconds and the service indication will been cancelled.


Posted on 8 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2014-2021 - What does the check engine light on Mercedes C-Class signal? Read Answer
    • Classe C 2014-2021 - What does the Mercedes C200 restraint system warning light mean? Read Answer
    • Classe C 2014-2021 - Where can I find the navigation updates of the Mercedes C-Class W204? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos