Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe C
  6. : Where is the cigarette lighter fuse located in the Mercedes C-Class?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Cigarette Lighter
Operation: Where is the cigarette lighter fuse located in the Mercedes C-Class?

In this tutorial we can see where it is and how to replace the cigarette lighter fuse on your Mercedes C-Class, i.e. the first thing to check if it malfunctions. As shown, the fuse in question is located in the fuse box inside the engine compartment on the driver's side and is fourth in the left column when looking at the vehicle from the front. If faulty, make sure to replace it with a 15A spare with the same characteristics, and to always operate with the vehicle off, otherwise we could cause damage to the various connected devices.


Posted on 17 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2000-2007 - Why isn't the cigarette lighter socket of the Mercedes W203 working? Read Answer
    • Classe C 2000-2007 - How do you replace the cigarette lighter in a Mercedes C-Class? Read Answer
    • Classe C 2000-2007 - How to locate the cigarette lighter fuse, in Mercedes C-Class W203? Read Answer
    • Classe C 2000-2007 - Where is the cigarette lighter fuse located in the Mercedes C-Class? Read Answer
    • Classe C 2000-2007 - How can you remove the cigarette lighter on a Mercdes Benz C-Class W203? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos