|
Do it yourself
| |||
| ||||
How to Replace Engine Oil and Filter on Mercedes A-Class
Model: Mercedes Classe A
W176
- Years:
2012, 2013, 2014, 2015, 2016, 2017, 2018
Video tutorial
Before replacing the engine oil, warm up the engine; the coolant should be at least 176 degrees Fahrenheit. The first step is to lift the vehicle using a lift or a hydraulic jack on the passenger side and place safety stands. To perform the oil change, remove the engine cover and unscrew the cap on the oil filter. Remove the oil filler cap. Raise the vehicle again with the lift. Remove the lower cover of the engine compartment. Be cautious as the oil is hot, so always use protective gear. Position a container for the used oil under the engine; unscrew the oil drain plug with a wrench and wait for all the oil to drain into the container. Clean any debris that has formed on the drain plug. Once all the oil has drained into the container, replace the plug without overtightening it to 22 lb-ft; remove the oil filter cap and clean any debris that has formed there as well; now replace the oil filter gasket. Lower the car and refill the engine oil with 5.5 quarts (use only approved oil). Now replace the filter and reassemble all parts in reverse order.
Updated on 8 July 2026 by ScegliAuto
Related tutorials
Mercedes Classe A
(2012-2018 /
W176)
.. the engine oil and oil filter on the Mercedes A-Class W176. First, lift the vehicle and start by removing the oil drain plug located under the engine.. …
Mercedes Classe A
(2012-2018 /
W176)
.. To change the engine oil of the Mercedes A-Class, lift the car with a lift or jack to access the underside of the engine compartment: here you will.. …
Mercedes Classe A
(2004-2012 /
W169)
.. replace the oil and oil filter of the Mercedes Classe A model W 169. We begin the oil replacement by opening the front hood and removing the oil filter.. …
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open the Fuel Flap on a Volkswagen Tiguan?
To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.054
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |