Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Seat Adjustment Control Module

Model: Mercedes Clk A208, W208, C208 - Years 1997-2003
Part: Seat

If the vehicle is equipped with electrically adjustable seats and it is necessary to replace the control module for this device, proceed as follows: the module is located beneath the seat, so you must first remove the seat; start by removing the side plastic covers to access the fixing screws of the seat itself; then remove these screws and lift the seat to access the support plate of the connector that must be dismantled to free the wiring and allow the removal of the control module, which is a black box to which all the power connectors for the various actuator motors of the system are connected.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Instrument Cluster on a Mercedes C180
Removing the Instrument Cluster on a Mercedes C180
Mercedes Clk (1997-2003 / A208, W208, C208) Removing the instrument cluster from the central console of this vehicle is a bit of a lengthy job, so take your time to carefully analyse this video…
Instructions for Removing the Window Switch Panel
Instructions for Removing the Window Switch Panel
Mercedes Clk (1997-2003 / A208, W208, C208) The window switch panel is located on the trim surrounding the gear lever, practically on the centre tunnel. To remove the switch panel, first unclip…
Removal of Secondary Air Pump
Removal of Secondary Air Pump
Mercedes Clk (1997-2003 / A208, W208, C208) The secondary air pump plays a crucial role during cold start, injecting a richer fuel mixture when the lambda sensor has not yet reached the correct…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos