Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Clk
    4. : Replacement of the external rearview mirror adjustment control

Mercedes Clk - Video tutorial

Model: Mercedes Clk W208 - Years 1997-2003
Part: Outside rearview mirror
Operation: Replacement of the external rearview mirror adjustment control

It usually happens that you have to replace the mirror of the external rearview mirror but in this case the break is due to the control of the adjustment of the mirror itself; it is therefore always necessary to unhook the mirror by levering the rear part and then unscrew the fixing screws of the support and adjustment control unit; then install the new unit fixing it with the relative screws, check its functioning and apply the mirror by aligning the relative fixing tabs and pressing until it fits perfectly.


Posted on 21 August 2023 by ScegliAuto



Removing the exterior mirror Mercedes CLK W209
Mercedes Clk (1997-2003 / W208) In today's video tutorial we will see how to remove the exterior rearview mirror of a Mercedes CLK first series. First we open the door and equip our
How to detach the mirror from the exterior mirror of a Mercedes Clk
Mercedes Clk (2002-2010 / W209) Let's see how to detach the mirror from the exterior mirror of a Mercedes Clk. With a lever (with plastic or rubber coating) we go to pry between the
How do you remove the door panel from the Mercedes CLK?
Mercedes Clk (1997-2003 / W208) In order to remove the door panel of the Mercedes CLK it is necessary to disengage the triangular plastic part that is located in correspondence with

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos