Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sl
    4. : Disassembly of the side indicator light

Mercedes Sl - Video tutorial

Model: Mercedes Sl MK 5, R129 - Years 1989-2001
Part: Side turn signal light bulb
Operation: Disassembly of the side indicator light

If the bulb of the side indicator light has to be replaced, it is necessary to remove the light which is fixed to the mudguard by means of a plastic tab that acts as an anchoring spring; it is practically possible to disassemble the light by pressing it forward so that the spring is pressed just enough to extract the rear part of the light and remove it from the mudguard; if you do not want to risk damaging this plastic tab (over time the plastic loses its elastic characteristics and could break) you can also remove the plastic wheel arch and access the light from the inside to be able to release it.


Posted on 21 August 2023 by ScegliAuto



How do you reset the Service light on the Mercedes SL?
Mercedes Sl (2001-2011 / R230) To reset the Service indicator light of the Mercedes SL, you need to insert the ignition key into the corresponding slot and turn it to start the ins
How do you reset the Service indicator light on a Mercedes SL?
Mercedes Sl (2001-2011 / R230) To reset the Service light on the Mercedes SL, you need to turn on the instrument panel by turning the key in the ignition block. Once the panel is o
How to replace the air vent on a Class Sl commodity
Mercedes Sl (2001-2011 / R230) Let's see how to remove the air vents on a Mercedes Sl-Class. Let's see in this video how to proceed with the disassembly of the aforementioned. With

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos