Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Slk
    4. : Replacement of the external mirror arrow bulb

Mercedes Slk - Video tutorial

Model: Mercedes Slk R170, MK 1 - Years 1997-2004
Part: Outside rearview mirror
Operation: Replacement of the external mirror arrow bulb

In order to replace the indicator light bulb on the exterior rear-view mirror shell, it is practically necessary to disassemble the extended mirror: start by unhooking the mirror from its support and disconnecting the wires from the defrosting system; then disassemble the mirror support itself and the external frame; at this point it is possible to remove the cap complete with the arrow by disconnecting the power supply wires of the bulb, unhook the indicator light and extract the bulb holder to replace the bulb; then proceed backwards to assemble the mirror.


Posted on 22 August 2023 by ScegliAuto



How to remove Mercedes Slk mirror indicators
Mercedes Slk (2004-2011 / MK 2, R171) If you have to remove the arrows integrated in the external rear-view mirrors, you must start by unhooking the mirror from its support, also disconne
Removing the external rear-view mirror to change the lamps
Mercedes Slk (2004-2011 / MK 2, R171) Replacing the bulbs inside the exterior rear-view mirror involves disassembling it. The operation requires the use of a screwdriver to unscrew the sc
How to remove the exterior mirror of a Mercedes Slk
Mercedes Slk (2004-2011 / MK 2, R171) Let's see how to remove the exterior rearview mirror of a Mercedes Slk. First of all we remove with a lever we remove the part of the inner lining of

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos