Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : How to replace the air filter on the Mercedes E-Class W212

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Air filter
Operation: How to replace the air filter on the Mercedes E-Class W212

The engine air filter inside your Mercedes E-Class W212 (year 2009-2016) must be replaced periodically in order to protect the engine from overheating which could lead to a loss of power or worse consequences. All you have to do is lift the front hood all the way up and locate the filter box located underneath the large central cover present. Immediately afterwards disconnect the tube connected to it and proceed with the removal of the lid of the box itself. Finally, also remove the filter inside it and replace it with a new one.


Posted on 28 May 2023 by ScegliAuto



How to replace the cabin filter on the Mercedes E-Class W212
Mercedes Classe E (2009-2016 / W212) .. the cabin air filter inside your Mercedes E-Class W212 (year 2009-2016), you just have to read the following guide dedicated to you and put the steps..
Engine air filter replacement in the Mercedes E-Class 250
Mercedes Classe E (2009-2016 / W212) The video shows us how to remove and replace the air filter that goes to the engine in the Mercedes E Class 250, that is the W212 model produced betw
Where are the fuses on the Mercedes E-Class W212
Mercedes Classe E (2009-2016 / W212) .. our new mini guide dedicated to your Mercedes E-Class W212 (year 209-2016) we will find out where all the various fuses of the vehicle are located. Before..

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos