Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sprinter
    4. : Loudspeaker disassembly instructions

Mercedes Sprinter - Video tutorial

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Loudspeaker
Operation: Loudspeaker disassembly instructions

In order to remove the loudspeaker located in the door, it is first necessary to remove the door panel itself (it is not necessary to remove the protective grille): then remove the covering around the opening lever and which also includes the handle grip in order to be able to access the screws below; the other screws are located on the lower edge and once removed it is possible to release the panel by levering along the edges; at this point it is possible to unscrew the fixing screws of the loudspeaker and move it far enough to disconnect the relative socket


Posted on 27 August 2023 by ScegliAuto



Disassembly of the cooling radiator on the Mercedes Sprinter MK1
Mercedes Sprinter (1995-2006 / W901, MK 1) In this video tutorial we will see the main steps to disassemble and replace the cooling radiator on the Mercedes Sprinter first series. Before proce
Alternator replacement instructions
Mercedes Sprinter (1995-2006 / W901, MK 1) In order to remove the alternator, it is easier to access from below and therefore to lift the vehicle onto a bridge; then disconnect the cables and
Replacing the alternator on the Mercedes Sprinter MK2 (906)
Mercedes Sprinter (2006-2018 / MK 2, W906) In today's video we will see how to disassemble and replace the alternator on the second series Mercedes Sprinter (906), following the instructions b

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos