Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe A
  6. : Where is the fuel pump relay located in the Mercedes A-Class?

Mercedes Classe A - Video tutorial

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Fuel pump
Operation: Where is the fuel pump relay located in the Mercedes A-Class?

In case of a fuel pump failure in the Mercedes A-Class W169, we can check the status of the corresponding relay and, if it is faulty, replace it at a low cost. As shown in this video, the relay in question is located in the box inside the cabin, precisely under the passenger side footrest, accessible by first removing the mat and protective panel. It is indicated by the letter "K" and is the third in the second row. In case it is damaged, remember to always use a replacement with the same specifications and operate with the vehicle turned off.


Posted on 8 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe A 2004-2012 - How much does it cost to replace the fuel pump in the Mercedes A-Class? Read Answer
    • Classe A 2004-2012 - Where is the fuel pump in the Mercedes A-Class? Read Answer
    • Classe A 2004-2012 - Where is the fuel pump relay on the Mercedes A-Class W169 located? Read Answer
    • Classe A 2004-2012 - How do you replace the fuel pump on the Mercedes A-Class W169? Read Answer
    • Classe A 2012-2018 - Where is the fuel pump of the Mercedes A-Class located? Read Answer
    • Classe A 2018-2024 - How much does it cost to replace the fuel pump on my marcedes A-Class? Read Answer
    • Classe A 1997-2004 - Where is the fuel pump of the Mercedes A-Class W168 located? Read Answer
    • Classe A 2012-2018 - Read Answer
    • Classe A 2012-2018 - How much does the fuel pump cost for Mercedes A-Class? Read Answer
    • Classe A 1997-2004 - Where is the fuel pump of a Mercedes A-Class located? Read Answer
    • Classe A 2004-2012 - Where is the fuel pump relay located on a Mercedes A-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos