Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fuel pump of the Mercedes A-Class?

Model: Mercedes Classe A W169 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Fuel pump

See other generations:
Video tutorial

To replace the fuel pump of the Mercedes Classe A, you will need to loosen the screws that secure the rear seat bench to its housing: once the screws have been loosened, it will be possible to remove the bench from its seat in order to access the components below.

The pump will now need to be freed from the fixing screws and corresponding power cables: once all the parts have been removed, it will be possible to extract the old pump and install the new one. It will need to be connected and secured before covering everything with the bench.


Posted on 1 April 2025 by ScegliAuto


Related tutorials

Guide to Replacing the Fuel Pump on the Mercedes-Benz A-Class
Mercedes Classe A (2004-2012 / W169) .. and replace the fuel pump on the Mercedes-Benz A-Class. To access the fuel pump, you will need to remove the fuel tank from the frame by disconnecting.. …
How to Replace the High-Pressure Fuel Pump on a Mercedes A-Class?
How to Replace the High-Pressure Fuel Pump on a Mercedes A-Class?
Mercedes Classe A (2018-2026 / W177) .. the high-pressure fuel pump on a Mercedes A-Class, open the hood to access the components in the engine bay. Here, remove the engine cover panel.. …
Where is the fuel pump relay located in the Mercedes A-Class?
Where is the fuel pump relay located in the Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) .. If the fuel pump in the Mercedes A-Class W169 fails, you can check the status of the corresponding relay and replace it for a small cost.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Classe A 1997-2004 - Where is the fuel pump of a Mercedes A-Class located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos