Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Fuel Pump on the Mercedes-Benz A-Class

Model: Mercedes Classe A W169 - Years 2004-2012
Part: Fuel pump

Follow these instructions to remove and replace the fuel pump on the Mercedes-Benz A-Class. To access the fuel pump, you will need to remove the fuel tank from the frame by disconnecting the fuel line and unbolting the bracket screws. Then, unbolt the fuel pump mounting screws using a 10 mm socket wrench, as shown in the video. At this point, disconnect the electrical connector to remove and replace the fuel pump with the new original one, reassembling everything!

Updated on 7 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you replace the high-pressure fuel pump of the Mercedes A-Class?
How do you replace the high-pressure fuel pump of the Mercedes A-Class?
Mercedes Classe A (2018-2026 / W177) .. the high-pressure fuel pump of the Mercedes A-Class, you need to open the hood so that you can access the components in the engine compartment: here.. …
How do you replace the fuel pump of the Mercedes A-Class?
How do you replace the fuel pump of the Mercedes A-Class?
Mercedes Classe A (2004-2012 / W169) .. To replace the fuel pump of the Mercedes Classe A, you will need to loosen the screws that secure the rear seat bench to its housing: once the.. …
Guide to Replacing the Water Pump on the Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. and replace the water pump on the Mercedes A-Class. First, open the hood of the vehicle and start by removing the air filter box, disconnecting the.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Classe A 1997-2004 - Where is the fuel pump of a Mercedes A-Class located? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos