Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where Are the Fuses for the Electric Roof in the Mercedes SLK?

Model: Mercedes Slk MK 3, R172 - Years 2011-2016
Part: Convertible top

In this video, see where the fuses for the electric roof are located in the Mercedes SLK, to check in case it shows signs of malfunction. As shown, the first two fuses are in the box located inside the engine compartment, protected by the black cover near the battery. They are labelled F2 and F3. The third and final fuse is located in the box inside the boot and is labelled F75. In case of a fault, ensure to use replacements with the same specifications and always operate with the vehicle switched off.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Manually Close the Roof of a Mercedes SLK
How to Manually Close the Roof of a Mercedes SLK
Mercedes Slk (1997-2004 / R170, MK 1) Before you can start, open the boot of your Mercedes SLK. Begin by unclipping and removing the internal side covers of the boot. Next, loosen the scr…
How to Manually Open and Close the Roof of the Mercedes SLK
How to Manually Open and Close the Roof of the Mercedes SLK
Mercedes Slk (2004-2011 / MK 2, R171) This guide outlines the main steps to manually open and close the roof of the Mercedes SLK. First, open the front doors and start unscrewing the scre…
How to Replace the Roof Struts and Seal on Mercedes SLK R171
How to Replace the Roof Struts and Seal on Mercedes SLK R171
Mercedes Slk (1997-2004 / R170, MK 1) Today, you will learn how to remove the roof struts and replace the seal on a Mercedes SLK R171, first series, following the instructions below. Firs…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos