Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sprinter
    4. : Replace the air conditioning cabin filter.

Mercedes Sprinter - Video tutorial

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Cabin air filter
Operation: Replace the air conditioning cabin filter.

We open the hood of the engine compartment and identify the location of the cabin filter (in the image indicated with a red arrow) positioned under the windscreen in front of the passenger seat. Remove the plastic box cover by releasing the hooks indicated, in the image, by the 2 red V-shaped arrows and slide it to the right to free access to the ventilation tube. Open the box where the air filter is housed and remove it to replace it with the new filter. Filter replacement should be done at least every 15,000 km or annually. The car we worked on is a Mercedes Sprinter.


Posted on 4 September 2023 by ScegliAuto



Removing and replacing the engine air filter
Mercedes Sprinter (2006-2018 / MK 2, W906) This video shows us the various procedures to remove and replace the engine air filter of our car. First we open the engine hood and identify where t
Air filter replacement on Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) Raise the hood and put on the special support rod for this very simple and quick maintenance. The engine air filter is located inside the compartment
How to replace the air filter of the Mercedes Sprinter 2?
Mercedes Sprinter (2006-2018 / MK 2, W906) If you own a second-generation Mercedes Sprinter (year 2006-2018) and need to replace the engine air filter yourself, then all you have to do is read

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos