Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Front Manufacturer Emblem.

Model: Mercedes Clk A208, W208, C208 - Years 1997-2003
Part: Manufacturer emblem

Lift the front bonnet of the car. Locate the locking mechanism of the manufacturer emblem. Use pliers to rotate this mechanism counter-clockwise until it is dislodged from the catch that holds it. At this point, lower the bonnet and remove the emblem along with the entire locking system. Replace the emblem by unlocking it from the locking mechanism by rotating the part that secures it. Once the new badge is inserted, reposition it by following the same steps in reverse order. The replacement is carried out on a Mercedes CLK.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Front Indicator Bulb
Replacement of Front Indicator Bulb
Mercedes Clk (1997-2003 / A208, W208, C208) The side indicator is integrated into the bumper trim: to access the bulb, disconnect the indicator itself. Use a plastic lever to push the indicator…
How to Replace the Cabin Heater Fan on a Mercedes CLK
How to Replace the Cabin Heater Fan on a Mercedes CLK
Mercedes Clk (2002-2010 / W209, A209, C209) To carry out this work, locate the area where the fan is situated. It is positioned behind the glove compartment in front of the front passenger seat…
Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Mercedes Clk (1997-2003 / A208, W208, C208) Position a suitable container under the oil drain plug of the sump and unscrew it to allow the oil to drain. Once the used oil has drained, screw the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos