Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Shoes and Cables on a Mercedes W201

Model: Mercedes 190 W201 - Years: 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
Part: Checks and maintenance

Video tutorial

The first step when replacing the brake shoes and cables on a Mercedes 190 model W201 is to remove the rear tyre. To do this, use a drill, then lift the vehicle.

Once the wheel is removed, you will be able to unscrew the fastening elements of the brake caliper using pliers and a screwdriver. Carefully remove the return spring from the lower brake shoe.

Now you can proceed to attach the element that connects the brake cable to the shoe. Install the lower return spring and tighten the brake caliper elements.

Refit the wheel and lower the car from the jack.


Updated on 14 August 2026 by ScegliAuto


Related tutorials

How to Replace the Bonnet Struts on a Mercedes W201
How to Replace the Bonnet Struts on a Mercedes W201
Mercedes 190 (1982-1993 / W201) Replacing the bonnet struts on the Mercedes 190 model W201 is straightforward. First, lift the front bonnet and secure it at the sides with wooden st…
How to Replace the Front Headlamp of a Mercedes W201
How to Replace the Front Headlamp of a Mercedes W201
Mercedes 190 (1982-1993 / W201) To replace the front headlamp of a Mercedes W201 (190E), open the bonnet and locate the upper fixing points of the headlamp unit. Remove the front gr…
How to Replace the Front Control Arm on a Mercedes W201?
How to Replace the Front Control Arm on a Mercedes W201?
Mercedes 190 (1982-1993 / W201) Replacing the front control arm on a Mercedes 190, model W201, is very simple with our guide and the following video tutorial. Start the replacement …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos