Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to install dynamic indicators on the Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Outside rearview mirror
Operation: How to install dynamic indicators on the Mercedes C-Class

In this video, we will show you how to install dynamic lights on a Mercedes C-Class W204 version. We start by removing the mirror using a plastic spatula, disconnecting the electrical plug, and then removing the cover by levering it and pulling it up vertically. We remove the transparent part from the mirror cover because we will need to replace it. We can find this accessory on the dpmcardesign website. Com: we select the C-Class and search for "Dynamic Sequential signal side mirror led" which costs $59.00. Now we insert the dynamic panel and screw it back in. If you have chosen the blue light, you will need to connect the red wire to a wire where you will expose the copper in order to provide power to the lamp. We cover it with electrical tape. We put the connector back in place and reassemble the mirror cover. Now we can put the mirror back on; we also connect its connector here, and the job is done.


Posted on 1 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos