Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on the Mercedes Sprinter 413

Model: Mercedes Sprinter MK 2, W906 - Years 2006-2018
Part: Service warning light

In today's video tutorial, you will be shown the entire procedure necessary to reset the service light on a Mercedes Sprinter 413. Start the operation by turning the key to the first position to power on the instrument cluster without starting the engine; then, press the "km" button located on the left side of the speedometer until the maintenance mileage message with the spanner icon appears on the information display. At this point, turn off the ignition and press and hold the "km" button while turning the ignition back on; finally, wait with the button pressed for the acoustic signal that indicates the reset is complete.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light and Maintenance of the Mercedes Sprinter
Resetting the Service Light and Maintenance of the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) In this brief guide, you will learn how to reset the service light and maintenance of the Mercedes Sprinter. First, get inside the vehicle and turn o…
Resetting the Service Light on the Mercedes Sprinter
Resetting the Service Light on the Mercedes Sprinter
Mercedes Sprinter (2006-2018 / MK 2, W906) Here are the steps to reset the service light for routine oil change maintenance on the Mercedes Sprinter. First, get inside the vehicle and turn on …
How to Reset the Service Light on a Mercedes Sprinter?
How to Reset the Service Light on a Mercedes Sprinter?
Mercedes Sprinter (2006-2018 / MK 2, W906) To reset the service light on a Mercedes Sprinter, connect a diagnostic tool to the vehicle's OBD port: this will be located in the lower part of the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos