Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Setting the Clock on a Mercedes Vito

Model: Mercedes Vito W639, MK 2 - Years 2003-2013
Part: Clock

This tutorial will show you how to set the clock on the onboard computer of a second generation Mercedes Vito, produced from 2003 to 2013. Start by turning on the vehicle's instrument cluster without starting the engine. Then, press the "M" button located on the left side of the speedometer three times; this will cause the hour display to start flashing. Use the "+" and "-" buttons on the right side of the speedometer to adjust the hour. To switch to the minute display, press the "O" button on the left side of the speedometer. Finally, after adjusting the time, press the "O" button again to complete the operation.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to set the time on the Mercedes Vito
How to set the time on the Mercedes Vito
Mercedes Vito (2003-2013 / W639, MK 2) The following steps will allow us to set the clock on the display of the instrument panel of the Mercedes Vito. First, we get into the vehicle and st…
How to set the time on the Mercedes Vito - Viano
How to set the time on the Mercedes Vito - Viano
Mercedes Vito (2003-2013 / W639, MK 2) These short and simple steps will allow us to adjust the clock on the instrument display of the Mercedes Vito, as well as on the Viano. First, we get…
How do you set the clock in the Mercedes Vito w639?
How do you set the clock in the Mercedes Vito w639?
Mercedes Vito (2003-2013 / W639, MK 2) The Mercedes Vito w639, of which we have a video presentation, allows us to easily adjust the clock using the buttons on the instrument panel, which …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos