Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Link

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Control arm

To replace the rear suspension link, lift the vehicle and remove the rear wheel for better maneuverability; then, unscrew the nut that secures the upper part of the link to the stabilizer bar, and remove the pin that secures the lower bushing of the link to the control arm of the suspension to completely remove it; then, insert the new link, first securing the upper part, and align the hole of the lower bushing with the one on the control arm to insert the pin and complete the installation.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the sway bar links on the front sway bar of a Mercedes C-Class?
How to replace the sway bar links on the front sway bar of a Mercedes C-Class?
Mercedes Classe C (2007-2013 / W204) In this tutorial, we will see how to replace the sway bar links on the front of a Mercedes C-Class, a very simple and quick operation. First, we lift…
Replacement of the starter motor of the Mercedes C-Class 300 (3.0 V6)
Replacement of the starter motor of the Mercedes C-Class 300 (3.0 V6)
Mercedes Classe C (2007-2013 / W204) Today we will discover the instructions for disassembling and replacing the starter motor of the Mercedes C-Class 300 (3.0 V6). First, it will be nec…
Guide to Replacing the Timing Chain on the Mercedes C-Class 250
Guide to Replacing the Timing Chain on the Mercedes C-Class 250
Mercedes Classe C (2007-2013 / W204) Today's main instructions will show you the procedure for removing and replacing the timing chain on the Mercedes C-Class 250. First, remove the fron…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos