Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How do you disassemble the center tunnel of the Mercedes C-Class?

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W205 - Years 2014-2021
Part: Central tunnel
Operation: How do you disassemble the center tunnel of the Mercedes C-Class?

To disassemble the central tunnel of the Mercedes C-Class, you need to open the storage compartment in the rear part of the tunnel: from this opening, it will be possible to pry the rear part of the tunnel lining. Then, you can proceed by moving the gear selector and disconnecting all the ventilation grilles; at this point, you can completely remove the panel and disconnect the connectors at the rear of it. In this way, you can insert the new replacement part, connecting it to the connectors and securing it with the internal clips.


Posted on 5 October 2023 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos