Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : How to replace the engine oil filter of the Mercedes W124.

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W124 - Years 1984-1995
Part: Oil filter
Operation: How to replace the engine oil filter of the Mercedes W124.

Replacing the oil filter on the Mercedes W124 is a very simple operation. First, you will need to open the engine hood and unscrew the oil tank cap to remove the dipstick and check the oil level. Then, unscrew the filter housing cap with a 13mm socket wrench and remove the oil container. At this point, lift the car and let the oil drain from the oil pan by unscrewing it with a 12mm wrench. After draining the oil, close the oil pan and lower the car. Install a new filter element in the filter housing and close everything as shown in the video.


Posted on 6 December 2023 by ScegliAuto



How to replace the air filter on the Mercedes E-Class W124
Mercedes Classe E (1984-1995 / W124) If you have not replaced the engine air filter of your Mercedes E-Class W124 (year 1984-1995) for a long time and want to find out how to do this, ju
How to replace the fuel filter on a Mercedes W124.
Mercedes Classe E (1984-1995 / W124) Replacing the fuel filter on the Mercedes E-Class, model produced up to 1995, is very simple. Today, thanks to our short video tutorial, we will expl
How to replace the air filter of the 1995 Mercedes E-Class.
Mercedes Classe E (1984-1995 / W124) With the help of this video tutorial, we will explain how to replace the air filter of the Mercedes W124, E-Class. First, we open the engine compartm

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos