Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe B
    4. : How to replace the window regulator on the Mercedes B-Class

Mercedes Classe B - Video tutorial

Model: Mercedes Classe B MK 1, W245 - Years 2005-2011
Part: Window lift button
Operation: How to replace the window regulator on the Mercedes B-Class

If any device is not activated by pressing the push-buttons of the window-raising controls on the door panel, it is likely that some micro switches inside it or even the electronic board may have been damaged; it is therefore necessary to proceed with the replacement of the entire push-button panel, which requires the disassembly of the door panel; once the panel has been removed, it is very simple to unhook the push-button panel of the window lifting controls, which also supports the controls for adjusting the external rear-view mirrors, and then install the new one taking care to make it fit perfectly.


Posted on 14 September 2023 by ScegliAuto



How to remove the window switch on a Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. have to open the front door of our Mercedes B-Class. Let's start by disassembling and removing the door panel, removing the inserts, unscrewing the..
Removing the Mercedes B-Class W245 window control panel
Mercedes Classe B (2005-2011 / MK 1, W245) .. replace the window control panel of a Mercedes B-Class W245. First of all, we go to open the front door on the driver's side and remove the door panel,..
How to remove the door panel of a Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. To remove the door panel of a Mercedes B-Class we will need a flat screwdriver and a torx screwdriver. First, with the help of the flat screwdriver,..

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos