Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a 2016 Mercedes E-Class

Model: Mercedes Classe E W213 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

Today, with the help of this short video tutorial, you will learn how to reset the TPMS light on a 2016 Mercedes E-Class, model W213. The first step is to check the pressure of all four tires and inflate them as needed. The recommended pressures are indicated on labels located inside the driver's door.

After performing the checks, you can proceed with the reset. To reset the light, turn on the vehicle's ignition, press the home button, and scroll through the menu to the "service" option.

Press "ok" and then select "tire pressure" and confirm the reset.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to Reset the Pre-Safe Light on the Mercedes Benz E-Class
How to Reset the Pre-Safe Light on the Mercedes Benz E-Class
Mercedes Classe E (2016-2023 / W213) .. light suddenly comes on in the Mercedes Benz E-Class is to perform a diagnostic check to ensure that it is just a warning triggered by a minor impact.. …
How to Reset the Service Light on a Mercedes E-Class?
How to Reset the Service Light on a Mercedes E-Class?
Mercedes Classe E (2016-2023 / W213) .. To reset the Service light on a Mercedes E-Class, insert the key into the ignition switch and turn it to activate the instrument cluster using the.. …
How to Reset the Service Light on the Mercedes E-Class?
How to Reset the Service Light on the Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) .. To reset the Service light on the Mercedes E-Class, turn on the ignition by rotating the key in the ignition switch: once the dashboard is lit up,.. …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos