Do it yourself
| ||||
|
Mercedes CLA - Video tutorial
Model: Mercedes CLA
X117, C117
- Years 2013-2019 Today's guide will provide us with the main instructions on how to disassemble and replace the water pump of the Mercedes CLA 4Matic. First of all, we open the engine hood and start disassembling and removing the turbocharger and its manifold, disconnecting the sensors and unscrewing the screws of the various manifolds. We unscrew the fastening screws of the intake manifold, thus accessing the water pump, as shown in the video. At this point, we drain the coolant, replacing the water pump with the new one. We then reassemble the manifold and the turbine, following the video tutorial until the end!
Posted on 10 January 2024 by ScegliAuto
Other guides that may interest you
|
How to replace the Ford Transit key batteryBelow I will explain how to replace the remote control key battery on the car, take a small screwdriver and pry the rear part of the remote control, (where there is the ring), at which point unhook the back cover and yes will have access to the compartment containing the battery. Always with the help of the small screwdriver, proceed to make the va and lift the battery out of the housing. Then take the new battery (check the type) and place it on the housing, always making sure to position it with the positive pole facing upwards. Finally, close the back cover by re-hooking it to the key. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.028
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |