Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the OBD Port on a Mercedes CLS250

Model: Mercedes CLS C218, MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Dashboard

See other generations:
Video tutorial

If you haven't found the OBD port on your 2013 Mercedes CLS250 yet, don't worry. With the following instructions, you will be able to locate it in seconds and safely.

Before searching for the OBD port, ensure the vehicle is off for the entire operation. Go to the driver's seat and locate the small cover situated in the lower area of the dashboard, beneath the steering wheel.

Once found, open it with your hands and locate the OBD port you were looking for.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

Where to Find the Fuses on a Mercedes CLS
Where to Find the Fuses on a Mercedes CLS
Mercedes CLS (2004-2010 / C219, MK 1) All the fuses on the Mercedes CLS are located within dedicated fuse boxes installed in the vehicle: in this type of car, you can find three fuse boxe…
Where is the Windscreen Wiper Fuse Located in the Mercedes CLS?
Where is the Windscreen Wiper Fuse Located in the Mercedes CLS?
Mercedes CLS (2010-2018 / C218, MK 2) In case of sudden malfunction of the windscreen wipers on the Mercedes CLS, first check the status of the respective fuses, whose positions are indic…
Where are the fuses located in the Mercedes CLS?
Mercedes CLS (2010-2018 / C218, MK 2) The fuses in the Mercedes CLS are located within the designated fuse boxes present in the vehicle: in this type of car, you can find two boxes for co…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos