Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing LED Bulb in Cabin Dome Light

Model: Mercedes Classe C W202 - Years 1993-2000
Part: Interior dome light bulb

Choose a new replacement bulb identical to the one being replaced. In this case, the dome light has an LED bulb installed instead of the old incandescent bulbs; however, both types are fully interchangeable without issues. Remove the dome light cover to access the socket, take out the faulty bulb, and install the new bulb. For LED bulbs, it is important to install them with the correct polarity. If the new bulb does not light up, rotate it 180 degrees and reinstall it. Reattach the dome light cover. The same procedure can be performed on other interior dome lights.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Cabin Light Bulb
Mercedes Classe C (1993-2000 / W202) The cabin light bulbs are generally T11 C5W (36 mm or 39 mm), also known as festoon bulbs, and can be replaced with LED ones. It is recommended to ch…
How to Remove the Dome Light in a Mercedes C-Class
How to Remove the Dome Light in a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) In this video, see how to replace the bulb or LED in the dome light of a Mercedes C-Class. Using a screwdriver or plastic trim tool, pry between the …
Removing the Dome Light from the Panel of the Mercedes C
Removing the Dome Light from the Panel of the Mercedes C
Mercedes Classe C (2007-2013 / W204) Removing the dome light? Remove the dome light from the cover panel of a Mercedes C. Pry between the dome light and the roof cover panel, then pull o…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos