Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Electric key shell replacement

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W202 - Years 1993-2000
Part: Key
Operation: Electric key shell replacement

This is a frequent and apparently complex problem to solve, but in this tutorial you will see how simple it will be to repair your key in a short time and without going to a workshop. Pry to fully open the plastic shell of the key, in this way you will get all the pieces of the key separated, go and buy the new shell and go and replace all the pieces in the new shell, after having extracted the plugs from the metal piece of the key. that blocked the two pieces, reassemble the whole key going to respect all the joints required by the shell and seal the pieces of the shell well with a bit of special glue and that's it, change the batteries for safety.


Posted on 19 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Classe C 2000-2007 - Why does the Mercedes C-Class remote control no longer work? Read Answer
    • Classe C 2014-2021 - How much does a Mercedes C-Class key cost? Read Answer
    • Classe C 2007-2013 - How to remove the ignition lock of the Mercedes C-Class W204? Read Answer
    • Classe C 2007-2013 - What locking problems can the Mercedes C-Class boot have? Read Answer
    • Classe C 2014-2021 - What to do if the Mercedes Benz W205 car no longer detects the key? Read Answer
    • Classe C 2014-2021 - Why does the Mercedes C-Class W205 not detect the key? Read Answer
    • Classe C 2014-2021 - How to replace the ignition lock on the Mercedes C-Class? Read Answer
    • Classe C 2014-2021 - How to replace the battery in the key of a Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos