Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : How to remove the arrow from the rearview mirror of the Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Side indicator light
Operation: How to remove the arrow from the rearview mirror of the Mercedes C-Class

A quick and easy replacement for a critical component, in this tutorial you will find out how to do this repair without going to a mechanic. Rotate the internal part of the mirror, to be clear the part of the mirror and not the external casing, it will be enough to apply a light pressure on the internal side of the mirror to rotate it inwards, now do not be afraid to use a little force to also rotate the mirror casing, closing it inwards and keeping it closed even with the weight of your own body, in this way you can remove the clip that connects the casing to the mirror and also disconnect the connector that turns on the indicator light, now you can work very comfortably on the inside of the casing by unscrewing the screws you can open the part where the bulbs are located and replace them, follow the steps backwards to reassemble everything.


Posted on 19 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos