Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Side Steps on a Mercedes GLC

Model: Mercedes Glc X254, C254, MK 2 - Years: 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

Installing the side steps on a Mercedes GLC is a straightforward task. First, if possible, lift the vehicle off the ground before starting the installation.

Begin by removing the lower side cover of the vehicle by taking out the Torx screws. Once removed, continue by taking out the screws that secure the inner part, and with the doors open, pull it out from its position.

Now, as shown in the video, install the side step. Secure the step using the previously removed Torx screws, as the step will replace the inner part that was removed earlier.

Once all screws are installed, reattach the cover that was removed earlier. For the left side step, simply repeat the same procedure.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

How to Install Side Steps on a Mercedes GLC
How to Install Side Steps on a Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) Start by removing the clips that secure the plastic door sills on your Mercedes GLC, then remove the corresponding lower bolts. Once done, open the d…
How to install the front windshield of the Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) In this guide we will see the main instructions useful for the installation of the front windshield of the Mercedes GLC, in simple and quick steps. B…
How to replace the windshield wipers of the Mercedes GLC 2
How to replace the windshield wipers of the Mercedes GLC 2
Mercedes Glc (2022-2026 / X254, C254, MK 2) To complete the procedure that allows you to independently replace the windshield wipers of your second edition Mercedes GLC, simply follow these ste…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos