Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Center Console from the Mercedes A-Class?

Model: Mercedes Classe A W177 - Years 2018-2026
Part: Center console tunnel

To remove the center console from the Mercedes A-Class, use a tool like a screwdriver to pry off the trim panel located at the front and rear ends of the console: once these two panels are removed, you can loosen the screws that secure the center console trim, which can then be removed. After removing the old panel, you can install the new one, securing it with the appropriate screws and reattaching the front and rear panels.

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Center Console of the Mercedes A-Class
How to Remove the Center Console of the Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. and replace the center console of the Mercedes A-Class. First, get inside the vehicle and start by removing the cover of the gear shift lever, prying.. …
How to Remove and Replace the Center Tunnel on a Mercedes A-Class
How to Remove and Replace the Center Tunnel on a Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. and replace the center tunnel on a Mercedes A-Class. Use a plastic trim tool to pry off the cover located at the bottom of the center tunnel. Remove.. …
How to Replace the Water Pump on a Mercedes A-Class?
How to Replace the Water Pump on a Mercedes A-Class?
Mercedes Classe A (1997-2004 / W168) .. To replace the water pump on a Mercedes A-Class, loosen the bolts securing the right front wheel and remove it along with the corresponding inner.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos