Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe M
    4. : How to reset and calibrate the tire pressure sensor of the Mercedes M-Class

Mercedes Classe M - Video tutorial

Model: Mercedes Classe M W166 - Years 2011-2018
Part: Checks and maintenance
Operation: How to reset and calibrate the tire pressure sensor of the Mercedes M-Class

By watching this short video, we will discover the instructions that will allow us to reset the tire pressure warning light and calibrate the TPMS sensor of the Mercedes M-Class; before performing the reset, it is necessary that all four tires are at the correct pressure. So, we get into the car and turn on the instrument panel; we go to the settings menu using the steering wheel controls until we reach the tire pressure option, confirming and performing the reset of the warning light and calibration of all four tires' sensors!


Posted on 7 April 2024 by ScegliAuto

    Frequently Asked Questions

    • Classe M 2005-2011 - What problems does the Mercedes 320 CDI have? Read Answer
    • Classe M 1997-2005 - What are the problems of the Mercedes ML320 CDI? Read Answer
    • Classe M 2005-2011 - What problems would have been highlighted, in the past, in the Mercedes ML W164? Read Answer
    • Classe M 2011-2018 - How many liters of diesel can the Mercedes M-Class contain? Read Answer
    • Classe M 2011-2018 - What does the AdBlue warning light on the Mercedes M-Class mean? Read Answer
    • Classe M 2005-2011 - What does A1 maintenance mean on Mercedes Benz? Read Answer
    • Classe M 1997-2005 - Where is the stop switch on the 2004 Mercedes ML? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos