Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Door Lock of the Mercedes C-Class

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Door lock

See other generations:
Video tutorial

Today's guide will illustrate the main steps on how to remove and replace the front door lock of the Mercedes C-Class. First, open the front door and start removing the door panel by unscrewing all the fastening screws and disconnecting the electrical connector of the window switch; then unscrew the screws securing the door lock to remove it, as shown in the video.

At this point, perform the repair or directly replace the lock, following the video tutorial to the end!


Updated on 25 September 2026 by ScegliAuto


Related tutorials

Guide to Removing the Lock from the Mercedes C-Class
Guide to Removing the Lock from the Mercedes C-Class
Mercedes Classe C (2000-2007 / W203) .. replace the front door lock of the Mercedes C-Class in this guide. First, open the front door and start removing the door panel; then disconnect the.. …
Disassembly and Repair of Mercedes C-Class W202 Door Lock
Disassembly and Repair of Mercedes C-Class W202 Door Lock
Mercedes Classe C (1993-2000 / W202) .. and repair the front door lock of a Mercedes C-Class W202. First, open the front door and use a hex key to remove the rear screw of the lock, which.. …
How to Remove the Door Lock from a Mercedes C-Class
How to Remove the Door Lock from a Mercedes C-Class
Mercedes Classe C (2007-2013 / W204) .. the lock mounted in the door of a Mercedes C-Class (left side). Before starting the disassembly, disconnect the battery terminals in the engine compartment... …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos