Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe C
    4. : Mercedes C-Class door lock disassembly guide

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W203 - Years 2000-2007
Part: Lock
Operation: Mercedes C-Class door lock disassembly guide

In this guide, let's find out the main steps to disassemble and replace the Mercedes C-Class front door lock. First of all, we open the front door and start disassembling the door panel; then we go to disconnect the electrical wiring and the handle cable, also removing the external handle, as illustrated in the video. At this point, unscrew the screws of the lock module to remove it from the door, replacing it with the new one (with the original spare part); then let's put everything back together, following the video tutorial until the end!


Posted on 14 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe C 2000-2007 - How much does it cost to replace the ignition lock of the Mercedes C-Class? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos