Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe E
    4. : How do you reset the automatic gearbox of the Mercedes E-Class?

Mercedes Classe E - Video tutorial

Model: Mercedes Classe E W212 - Years 2009-2016
Part: Gearbox
Operation: How do you reset the automatic gearbox of the Mercedes E-Class?

The procedure for resetting the automatic transmission of the Mercedes E-Class involves inserting the ignition key, so that the instrument panel can be turned on: once the panel is on, you will need to press the accelerator pedal for about ten seconds and then release it and turn off the panel again. Then you will need to wait about two minutes, after which you can start the car and drive for about 15 minutes: by doing this, the transmission will learn the driver's driving habits, setting new parameters for gear changes.


Posted on 3 May 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe E 2002-2009 - How do you unlock the automatic gearbox of the Mercedes E-Class W211 version? Read Answer
    • Classe E 2009-2016 - How to manually unlock the automatic gearbox of the Mercedes E-Class W212? Read Answer
    • Classe E 2002-2009 - How to unlock the automatic transmission of the Mercedes E-Class 320 4matic? Read Answer
    • Classe E 2009-2016 - How much lubricant should I put in the automatic gearbox? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos