Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe C
  6. : Guide to disassembling the front door panel of the Mercedes C-Class

Mercedes Classe C - Video tutorial

Model: Mercedes Classe C W204 - Years 2007-2013
Part: Door panel
Operation: Guide to disassembling the front door panel of the Mercedes C-Class

Following this short and simple guide, we will see how to disassemble and replace the front door panel of the Mercedes C-Class. First of all, open the front door of the car and start unscrewing all the fixing screws that we find on the sides of the door panel; then lever on the sides to detach it and remove it, disconnecting the handle cable and the electrical connector of the window switch panel, as shown in the video. At this point, it will be possible to access the inside of the door, finally reassembling the panel, applying the reverse procedure!


Posted on 4 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos