Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Windshield Wiper Blades Without a Frame

Model: Mercedes Clk A208, W208, C208 - Years 1997-2003
Part: Windshield wipers

Good visibility is important, especially during bad weather, so replace your wiper blades frequently. Purchase the correct wiper blade suitable for your vehicle. To replace, release the lever on the wiper, push the arm forward to detach it from the mount, then remove the blade from the arm. Take the new blade out of the packaging, lift the retaining hook, and slide the blade onto the arm. Lower the blade towards the bonnet until the spring clicks into place. Lower the retaining hook and rest the blade on the glass. Check the correct operation by activating the wiper.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Silent Block Bush
Replacing the Silent Block Bush
Mercedes Clk (1997-2003 / A208, W208, C208) If the rubber bush attached to the suspension arm connected to the steering rack tie rod fails, it can be replaced quickly and economically; lift the…
Replacing the Car Control Arm
Replacing the Car Control Arm
Mercedes Clk (1997-2003 / A208, W208, C208) The suspension arm of the car connects the chassis to the struts. However, it can wear out over time or due to impacts, and a faulty arm can lead to …
Removal and Replacement of a Single Wiper Arm
Removal and Replacement of a Single Wiper Arm
Mercedes Clk (1997-2003 / A208, W208, C208) Gently lift the plastic covering the wiper arm near the hinge. Now, using the appropriate spanner, undo the bolt that connects the arm to the hinge. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos