Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Clk
    4. : Removing the wiper motor

Mercedes Clk - Video tutorial

Model: Mercedes Clk W208 - Years 1997-2003
Part: Windscreen wipers
Operation: Removing the wiper motor

If the drive mechanism of the wiper blade complete with motor has to be removed, proceed as follows; start by opening the front hood and lift it until the support safety catches snap into place; therefore remove the plastic grilles immediately under the windscreen by releasing the relative fixing tabs; at this point unscrew the fixing screws of the plastic cover always present under the windscreen and release the pressure tabs to be able to remove it completely, also removing the frame applied just under the brush; you can therefore proceed with the disassembly of the brush control mechanism by disconnecting the motor power socket and the glass washer fluid tube.


Posted on 5 September 2023 by ScegliAuto



Removing and replacing a single wiper arm.
Mercedes Clk (1997-2003 / W208) Gently lift the plastic covering the wiper arm near the hinge. Now, using the appropriate wrench, we unscrew the bolt that joins the arm to the hinge
Replacement wiper blades without headband
Mercedes Clk (1997-2003 / W208) Seeing well is important, especially in bad weather, so replace your wiper blades frequently. Purchase the wiper blade suitable for the type of vehic
How to replace the windshield of your car
Mercedes Clk (1997-2003 / W208) The windshield of our car can be damaged, in which case it must be replaced. The guide below shows you how to do it using your good will. Start remov

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos