Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the starter motor of the Mercedes CLK

Model: Mercedes Clk A208, W208, C208 - Years 1997-2003
Part: Starter motor

The following steps today will show us how to disassemble and replace the starter motor of the Mercedes CLK. First of all, we open the hood of the car and start by disconnecting the battery as a precaution; then we lift the car and locate the starter motor, as shown in the video. At this point, we unscrew all the fixing screws and disconnect the electrical connector to remove it and replace it with the new original one; we make the electrical connection and then test the operation of the starter motor and the starting of the engine.

Posted on 5 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing or Cleaning the Mass Air Flow Sensor on a Mercedes CLK
Replacing or Cleaning the Mass Air Flow Sensor on a Mercedes CLK
Mercedes Clk (1997-2003 / A208, W208, C208) Are you experiencing operational issues with your Mercedes CLK? Here's how to properly remove and replace the mass air flow sensor. Open the bonnet, …
How to replace the lock cylinder of the Mercedes CLK
How to replace the lock cylinder of the Mercedes CLK
Mercedes Clk (1997-2003 / A208, W208, C208) In this short guide, we will see the main steps on how to disassemble and replace the lock cylinder of the Mercedes CLK. First, we open the front doo…
Replacement of the cabin air filter of the Mercedes CLK
Replacement of the cabin air filter of the Mercedes CLK
Mercedes Clk (1997-2003 / A208, W208, C208) The instructions provided in this guide will show us the procedure for replacing the cabin air filter of the Mercedes CLK. First of all, we get on bo…

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos