Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Windscreen Wiper Fuse

Model: Mercedes Clk A208, W208, C208 - Years 1997-2003
Part: Windshield wipers

If the wiper system does not work or the pump located in the washer fluid reservoir does not activate to release water from the nozzles, the first thing to check is the integrity of the corresponding protection fuse: open the front bonnet and locate the fuse box on the driver's side, just below the windscreen, next to the brake fluid reservoir; then remove the cover of the fuse box and consult the legend located just under the cover to identify the fuse for the wipers and extract it from its socket to check its integrity; if it needs replacing, use one of the same amperage.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine fan fuse of a 2000 Mercedes CLK
How to replace the engine fan fuse of a 2000 Mercedes CLK
Mercedes Clk (1997-2003 / A208, W208, C208) When the engine fan stops working, it is necessary to replace the fuse related to it. The fuse in question is located inside the fuse box in the engi…
Removal and Replacement of a Single Wiper Arm
Removal and Replacement of a Single Wiper Arm
Mercedes Clk (1997-2003 / A208, W208, C208) Gently lift the plastic covering the wiper arm near the hinge. Now, using the appropriate spanner, undo the bolt that connects the arm to the hinge. …
Replacing the Fuel Pump Fuse
Replacing the Fuel Pump Fuse
Mercedes Clk (1997-2003 / A208, W208, C208) If the engine struggles to start, the first thing to check is whether fuel is reaching the engine, meaning the pump in the tank should activate when …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos